How to print a self-test report Make sure that plain white paper is loaded in the input tray. Check the power connection. Check for missing cartridges Open the top cover, and then check if one or both of the cartridges are missing. The light stops blinking when the product receives all the print data. Slide the cartridge at a slight upward angle into the empty slot, and then gently push it forward until it snaps into place. Make sure that the carriage can move freely across the width of the product by gently pushing the carriage to the left and then to the right. Press the cloth against the paper feed rollers and then rotate them upward with your fingers.
|Date Added:||18 May 2009|
|File Size:||35.15 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The product is turned off, or there is an issue with the power source. Choose from the following methods to remove and reattach the rear access door or duplexer to the rear of the ho.
Reinsert the cartridge Hold the cartridge so that the nozzles face down and the contacts face toward the carriage. Do not remove jammed paper at this stage. Remove the cartridges Press the Power button to turn on the product.
Solutions A carriage jam can occur for several reasons. Press the cloth against the paper feed rollers and then rotate them upward with your fingers. Wait until the warm-up period completes before you continue.
HP Deskjet 5552 Standard Inkjet Printer
Solutions Your product has either a rear access door, or a two-sided printing accessory duplexer. Carefully remove any jammed paper and bits of torn paper from the rollers inside the product.
A clean, lint-free cloth, or any cloth that will not come apart or leave fibers. Never remove paper from the front if you can pull it from the deskjt of the product or from the paper tray first.
Insert cartridges Follow these steps to insert a cartridge. The yellow arrow points to the Black Cartridge Problem icon. Reconnect the USB cable, and then try to print again.
Clean the paper pick rollers inside the product Your product has either a rear access door deskje a duplexer. Carefully remove any jammed paper or bits of torn paper from the rollers inside the duplexer.
HP Deskjet 5552 Manuals
The Power light is on In this normal condition, the following light pattern displays on the product control panel:. Do not press the buttons on the deskjt of the duplexer when reattaching it to the product or it might not snap securely into place. You must disconnect the power cord to move the carriage mechanism by hand without the risk of electrical shock.
Clean the paper rollers through the duplexer Gather the following materials:. If the product does not turn on by itself, press the Power button to deskjdt it on. Clean the paper rollers Your product has either a rear access door, or a duplexer.
Europe, Middle East, Africa. Blinking lights The lights on the front of the Deskket product can be on, off, or blinking flashingdepending on the status of the product.
Hp Deskjet Manuals
Click OKand then click OK again to print the document. From the Type is drop-down menu, select the paper type that matches the paper in the tray. Before you begin, deskiet sure that the cartridges are compatible with your product. With the damp cloth, clean the rollers inside the duplexer.
HP Deskjet Ink Cartridges |
Clean the rollers through the duplexer Follow these steps to remove the duplexer and then clean the dsekjet rollers in the rear of the product. Determine the cartridge issue When there is an issue with a cartridge, a yellow arrow on top of the carriage inside the product points to a drawing of a cartridge that indicates what the issue is.
Push down on the cartridge to release it, and then pull the cartridge toward you to remove it from its slot. Make sure that the stack of paper contains no fewer than 10 sheets and no more than deskjef sheets of paper.
Remove the protective tape from the cartridge.
Follow these steps to remove and then reinsert the cartridges. With the product turned ondisconnect the power cord from the rear of the product, if it is not already disconnected.